Yarn Binder..

Fiber proof testers are made to apply a set load to a fusion-spliced optical Fiber in order to check the effectiveness of the spliced Fiber. Our Fiber proof testers are available in each linear and rotary styles, for both proof and stress testing. Fiber evidence testers are accessible for single setting, multimode, and polarization-sustaining fibers. Choose from devoted, stand alone techniques or Yarn Binder which are also able to stripping, cleaning, cleaving, splicing, or recoating.

Fiber Recoaters with Proof Testers offer simple, integrated solutions to recoat and check fusion-spliced materials. The Fiber recoating process restores the buffer covering to some removed Fiber, offering much more versatility when compared to a heat-shrink safety sleeve, enabling it to be handled and coiled without damaging the combination-spliced section. The incorporated linear or rotary proof tester enables customers to instantly check a recoated Fiber with a pre-determined load and determine the long-term longevity of the Fiber. Because of the capacity to recover a combination-spliced Fiber to near initial problem, these techniques are perfect for applications including undersea visual Fiber cables, submarine interaction wiring, Fiber lasers, or Dispersed Bragg Reflector (DBR) lasers.

The process begins with the combination-spliced section of Fiber becoming placed in the midst of the mold assembly (see image for the right). As soon as set constantly in place, inserts in the Fiber blocks secure the spliced Fiber in place. Recoat materials is pumped to the cavity then Ultra violet-treated. The recoated Fiber can then be tested by pulling on it up to a pre-determined weight.

Recoater and Mold Assembly Choices – Recoaters are available with either an automated or manual mold set up. The automated mold assembly features pneumatic control over the mold dishes and is also optimized for top-volume SZ Stranding Line. Manual mold assemblies, around the other hand, use easy-to-open mold dishes which provide more versatility and are perfect for low-volume production or R&D programs. A computerized or handbook volumetric dispensing pump and injection method is used to inject the recoat materials in to the mold cavity.

The PTR208 automated recoater comes standard having a mold set up for Ø430 µm covered fibers; For our manual recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold set up is sold separately to ensure that clients can pick the right mold covering size for his or her application. Custom mold coating dimensions can be purchased up to Ø900 µm. Pre-setting up the mold set up at the factory is also readily available. Get in touch with Technology Support for more information on custom molds or factory set up.

We provide you with each high-directory (Item # AB950200) and reduced-index (Item # PC373) recoat materials to use in these recoaters. Recoaters with handbook injection pumping systems (Item #s PTR206B and PTR307B) are suitable for each varieties of recoat materials; all other recoaters are appropriate for the top-index materials only. Our handbook recoaters with the automated shot program (Item #s PTR206 and PTR307) can be personalized to work with both reduced- and-index recoat materials; please contact Tech Assistance for more information.

Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters have an incorporated linear evidence tester, which takes the Fiber as much as a predetermined load (20 N) then produces it. The linear proof tester utilizes the same Fiber holding blocks as the recoater and thus the Fiber does not must be moved just before screening. The PTR307 and PTR307B Fiber Recoaters come with a built-in rotary proof tester, which can perform both proof and tension assessments (?89 N). A single set of evidence test grips is included; substitute evidence check grips are available below in packages of 10. Each screening process is fully automated through the included handset or tablet pc control, allowing the user to choose guidelines this kind of fdrofe the stress, the pace in which the stress is applied, and the hold time.

Inserts for Fiber Keeping Blocks – In addition to the previously mentioned, we provide many different Secondary Coating Line to be used in the Fiber holding obstructs of the recoaters in order to support a broad range of Fiber coating diameters. For recoaters having a rotary proof tester, the inserts are appropriate for Fiber covering diameters within a range from 125 µm to 900 µm. For recoaters with a linear proof tester, the inserts cover a range for Fiber films from Ø250 µm to Ø900 µm.